{Chrysler 300} Fwd: Re: F & G core support paint -
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} Fwd: Re: F & G core support paint -



Responding to Nick Taylor's email re 300F core support paint - here's my email exchange with attached schedule with Don Verity, when I was freshening up my 300-F's engine bay last year.

Noel
---------- Original Message ----------
From: Donald Verity <chryslerdon@xxxxxxx>
To: "cpaviper@xxxxxxxxxxx" <cpaviper@xxxxxxxxxxx>
Date: 03/21/2022 8:50 AM
Subject: Re: F & G core support paint -


Hi Noel,
You sure did a lot of research! You should get this on the club web page.
Don

Hi Don,

Just for kicks, last night I reviewed my photo files and created a spreadsheet of core support paint combinations I saw - see attached. I've also attached a sheet showing the '61 core support paint combo that John Begian texted me - although I see it's a DeSoto but am guessing it's the same for '61 Chryslers.

The attached schedule tracks the following for non-black cars, as best as I could tell from my photos -
  • Owner of the car
  • '60 or '61
  • Body color
  • Coupe or convertible
  • Location - where I took the photo
  • Column F - 'X' - if the front of the core support was painted black.
  • Column G - 'X' - if the front of the core support is body color.
  • Column H - 'X' - if the inner fenders just ahead of the core support have some black overspray - I think this is how you it should appear.
    • The only cars that have this paint treatment are -
      • An all original PP1 F coupe at Mystic and another Meet. I don't know the owner.
      • Gil's blue F convertible
      • Mike Burke's yellow F coupe
      • Scott Dejka's red G coupe - that Gary Goers significantly assisted in the restoration
      • Andy's white G coupe
      • Your white G coupe
  • Column I - 'X' - if the core support is painted black, but was taped off so there's no overspray on the inner fenders just ahead of the core support.
  • Column J - 'B'-if body color; 'X' if black. Note that a few cars (marked 'Xa') have the upper more horizontal part of this hood latch post painted body color, and the vertical part that runs down behind the grille is painted black.
  • Column K - 'X' if the horns are painted black.
Let me know if you have any further comments. I'm going to paint the front side of my F's core support black, but I haven't decided if I'm going to do the overspray treatment. (I don't know if I trust myself to do it nice and even!)

Thanks,
Noel

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1670693120.1395928.1675110105175%40connect.xfinity.com.

Attachment: 300 F.G Core Support Paint.xlsx
Description: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.