|
When your guy said 'weld', I think he meant solder. From what I
understand, silver soldering is the way to fill pits. There is also an alloy
that is advertised as Muggy Weld. I never investigated it, so I don't know if it
is effective or not.
Ron From: chrysler-300-club-international@xxxxxxxxxxxxxxxx [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx] On Behalf Of info@xxxxxxxxxxxxxxxxx Sent: Friday, January 27, 2023 1:22 PM To: 'Bob Merritt'; 'chrysler 300 club' Subject: AW: {Chrysler 300} Fwd: 1962 Chrysler 300 Tail Light Bezels Hey
Folks, Greetings from
Germany! I had
the same problem a few years ago and found real good ones with the help of the
Club (thanks again!), and I needed both sides as my old ones were
broken. When I
took the new ones to my Chrome guy I also took along the old ones, rather
accidentally - and he said he could weld them !?!? I could
NOT believe that (because usually nobody welds this kind of junk metal =
Zinkdruckguß = zinc diecasting) Well he
didn’t weld my bezels so far (I keep them on stock just in case) but he welded
an chromed my horn ring (broken 3 times) made of the same material and it looks
like new. Of
course I don’t know how strong this work is - and maybe my ring once will break
when some stupid driver is in front of me and I have to honk him real
hard…) But the
car still isn’t back on the road…. What I
want to say: maybe you DON’T throw away your old broken bezels because they are
rare as hell, gather some and send them over to Germany if there is
interest. In this
case I could ask for the repair price with chroming- but this guy is not
cheap…. Once
installed I can imagine these bezels don’t have to suffer much forces and
should stay in one piece Have a
nice weekend, Kai Dr. Kai
Rentmeister
Tierarzt,
DiplECVN Tierärztliche
Praxis für Neurologie Sandäcker
7 97337
Dettelbach 09324 –
9787630 Tel 09324 –
9787635 Fax Von: chrysler-300-club-international@xxxxxxxxxxxxxxxx
<chrysler-300-club-international@xxxxxxxxxxxxxxxx> Im Auftrag von
Bob Merritt If anyone can help, reply to Jared
Bob, I am in desperate
need of a pair of 1962 Tail light bezels if anyone can help. You can
contact Jared via email jmbb11@xxxxxxxxx or
telephone (904) 868-4114. Thanks in
Advance -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/002d01d9327c%2443af8490%24cb0e8db0%24%40tierneurologie.de. -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/E00658285A0E4065A4D5DD49871A4DB7%40ThinkPadL520. |
Back to the Home of the Forward Look Network
Archive Sitemap