Re: {Chrysler 300} 300F Undercoating

Here are pictures under my 300F when I was doing the exhaust and you can see various areas of undercoating. I have more and the car is on my lift if you need anything specific.

https://photos.app.goo.gl/aFi3vHcni7dkqKBL7

Also note that the body was undercoated on the assembly line before it was dropped down onto the subframe and drivetrain. The subframe was dipped in thinned black paint.

On Fri, Jan 6, 2023, 3:04 PM Jim Birr <jebirr@xxxxxxxxx> wrote:

My car is getting ready to come off of rotisserie (yeah) and shop wants to paint and undercoat it's belly (undercarriage) before it comes off.

Conversations with Jamie Hyde indicated

Under side is body color! Everything including the wheel houses, then undercoated. Fender liners are body color.
Texture a bit rougher than rattle can stuff and not as dull as.

So my question to the group - any recommendations on product to use? May not be a concours car when done but don't want to do anything to preclude it - especially something relatively simple like this.

Thanks

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/0e0e050a-b512-4834-9b00-0154677243adn%40googlegroups.com.