{Chrysler 300} new 14 inch wheels

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Hello everyone,

 

Can anyone advise if they have used a Wheel Vintiques 14 inch by 6 wheel successfully with stock factory 14 inch hubcaps?  The part numbers are:

 

summit number WVI-12-461204

 

Wheel Vintiques Number 12-461204

 

The above are the same wheel, just different part numbers. The back space is 4 inch which is what I measured on the factory spare in the car.  I am concerned that the diameter for the hubcaps will not be correct, measured at about 13-1/2 to 13-5/8 inch. I am also wondering if the valve stem hole falls correctly.

 

Anyone who has used these wheels or tried them,  I would appreciate your experience.

 

Thanks, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171E808E47350377E2BD3A1935C9%40CY5PR19MB6171.namprd19.prod.outlook.com.