RE: {Chrysler 300} 300K upper right chrome grill opening trim access

[<finsruskw@xxxxxxxxxxxxxxx>]

James,

¼ “ drive socket with a flex joint and extensions IIRC.

Probably a 3/8” or 7/16’” speed nut.

And go easy, the studs will break if corroded bad enough.

Dave Schwandt

 

From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Tuesday, October 4, 2022 5:28 PM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} 300K upper right chrome grill opening trim access

 

Hello, can someone refresh my memory as to how one accesses that upper left or right trim part? I seem to remember that it is a PITA. One side is loose. I would like to tighten it. It has been 30 years and the memory fades…

 

See photo.  Thanks, James

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171567754578EA84E6E58AC935A9%40CY5PR19MB6171.namprd19.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/015601d8d842%24ca5e79e0%245f1b6da0%24%40iowatelecom.net.