Hello Club, I am gauging interest in reproducing the “spring” that goes around the brake drum on the 12” drum brake cars. At one time we had a club member who made these for us, but sadly he no longer does. We have found a vendor who is
willing to do the project but of course it is all about the set up costs and the quantity involved. I think we can bring these in for about what they cost back when they were being reproduced by our member. We are looking at about 80 dollars a set (4) plus
shipping. If you are interested in having me pursue this please let me know and I will work on it. It would be a volume purchase and once they sell out we would not be able to get any more from that vendor unless we pay the set up costs again. Send me an
email at Jamie.hyde@xxxxxxxxxxxxx and I will add you to my spreadsheet, this would not be a commitment to buy then, just for me to get an idea of how many we this we think we would need to order before I approach
the club board for funding. For you guys with the 11” drums let me know as well because I will start another spread sheet for them as they are of course different than the 12” but first we are going to look at the 12” drum springs.
Jamie Hyde 585-465-0067 For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/69db09c91633411aa617f89c0c910a5d%40optimation.us. |