{Chrysler 300} Re: 300 F power steering return hose
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} Re: 300 F power steering return hose



You can get a length of power steering return hose
from NAPA or any local auto parts store.
I think it is 5/8" diameter. It is much stiffer
than heater hose.
You will find installation of the new hose
extremely difficult at the steering box connection.
New hose will not want to slip over the connection,
almost as if it was the wrong size. If you carefully
heat the new hose (with a hair dryer) it will add
some flex to the material and make install a bit easier.

The connection to the pump is not as bad but don't
abuse the pipe --  you could break the joint at the can
and have a leak.

Bob



On 12/10/2021 8:54 AM, dplotkin@xxxxxxxxxxxxxxxxxxx wrote:

Bob-

 

I think I've heard you twice warn in your videos not to use heater hose as power steering return hose because it will sweat. Well my F is a poster child for that.

 

What is the easiest way for a later middle aged male to tackle this on an AC car?

 

Danny Plotkin


--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/61B36141.7070100%40simplexco.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.