Re: {Chrysler 300} Daytona Parts Co
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} Daytona Parts Co



i had terrible experience there , but agree were good many years ago .

These are the guys who wrapped shim stock around the throttle shaft in my WCFB several years back —to fill a loose fit on throttle shaft in carb body (!!!) instead of boring for a new shaft bushing .  ( a standard repair ) . the shim was later drawn into throttle bore space next to throttle plate by “ walking “ or vacuum , causing the throttle not to seat square , thus constantly varying idle etc . .. on and the the off car 4 times . Impacted the spark advance too in weird ways by destroying relationship of vacuum port for spark and throttle closed position . That varies idle too . Nice. Did i mention it varied every week or so ? Big symptom of this is the carb does not return to idle set screw always , even with a big spring .   

Finally rebuilt it myself , FOUND and removed the shim and put in a bushing . 

Very hard to find  intermittent —- directly caused by this half azz rebuild - for 400 $ too . Truly clueless bad thing they did . And I bet done to many others . I am rarely a negative dude , but this raised mayhem for me for 6 months due to stupidity . 

the kit to do bushing with reamer and 4 bushings is about 40 $ ( against the 400?) on ebay .

Stay FAR away from this place . 

Mike’s carb parts , do it  yourself 


Sent from my iPhone not by choice 

On 19 Nov 2021, at 12:41 pm, Bob Merritt <bob@xxxxxxxxxxxxx> wrote:


It looks like I received incorrect information some time ago
and I'd like to fix that.

Daytona Parts is a carb company and for years offered
kits and rebuild service. I had been told that their rebuild
service was discontinued. This is not the case. For me, I
am delighted to hear this since the carbs they did for me
over past years have been great.

Here is the contact information:

Daytona Parts Co., 11911 Turnbull Bay Rd., New Smyrna Beach, FL., 32168, 386-427-7108 http://www.daytonaparts.com/


-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/6197E1DF.4010102%40simplexco.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/6181CC20-B7EB-4346-9A70-49F1793FF036%40gradyresearch.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.