Re: {Chrysler 300} Rear brake drums / hubs ? changed in 60 ?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} Rear brake drums / hubs ? changed in 60 ?



John,

   You may want to contact Jeff Carter.

Jeff provided a complete setup for the C to return front dics to factory drums.

   Gary

On Sun, Nov 14, 2021, 10:17 AM John Grady <jkg@xxxxxxxxxxxxxxxxx> wrote:
As we know these drums were factory made by Chrysler in one  piece riveted with hub (?) and possibly machined that way 57-59 and probably  back to 30’s . . So perfect centering .

As I still have no success on finding 11 x2  Dodge rears  ,( 2.5 are out there )  — and someone had very poorly modified mine by removing original drum , adding another loose drum ( later mopar ,?  and new studs ) They used the stud holes to locate , totally inadequate ,  — as done..  Runs out .060 + and cut .100 over ( dumb..)! But all that driven by lack of availability ?
So in looking , there are new 60-61 11 x 2 drums around for 60-61 Dodge . They are loose without taper hub .But as (I think !) I recall 60 dodge used tapered axles like our 300 do up till 62 . And these new 60  drums fit on front , too (!)
So are 60 mopar  drums serviced separately from the hub ( why different drums listed  in 60-61  vs 59 back? ) Dodge 11x2 59 back with hub drums are impossible to get , we may face this on our 12” drums very soon . Still available ( Kantor last year ) but waning supply and very large $
.
Does anyone know about this ? The 60 dodge drum has a defined toleranced pilot hole , I assume for centering , but the 58 hub I have does not have that machining , 1960 must — although  I think I can add that ? Maybe 60 hubs all have it , Or possibly same guy cut the hub face to align new drum he used in and out?

A drum revision in 60 ? Also in the 60 dodge front and back drums interchange — a very rational reason to allow hub and drum to separate ??  although the 60 hub has rivet holes  too

Obviously all probably applicable to 300 too , just larger drum ... ??
comments ?
Thank you ,
John




Sent from my iPhone not by choice

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/673DEB8A-0578-46A5-A080-E32878A242A0%40gradyresearch.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CACN-kqPA9qvNQoiuqmmi1saGS71B69GJiB%2Bf7PDtszRMUkHyVg%40mail.gmail.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.