Bob, Could you elaborate on how it is installed? Obviously you can’t take the deck lid apart, so how do you fit replacement pads? Cut out old and glue in new? Pull out old from under lid bottom and somehow slide in new? Bob J 300G From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Robert Kelley Al; This past fall I ordered a set from Query and reported back to them that both pads were under size and not allowing a press fit under the hood braces. All worked out well as Query provided me with bulk replacement pad material. Suggest you provide needed pad dimensions before you order. Bob K. ----------------------------------------- From: "Al Macdonald" Has anyone reproduced the material between the 2 deck lid halves for a 60 F and others? Thanks Al Sent from Mail for Windows 10 -- -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/00e801d6e909%248c73dff0%24a55b9fd0%24%40comcast.net. |