Re: {Chrysler 300} 1956 wiper switch and motor

john

Sent from my iPhone not by choice

On 5 Jan 2021, at 3:12 pm, Jim Jungwirth <jk-jungw@xxxxxxxxxxx> wrote:

Jack,

It sounds like you are approaching it the right way. First question is: Do you know that the motor works? Maybe try bench testing it if you have not already.

Jim

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> on behalf of jackcboyle@xxxxxxxxx <jackcboyle@xxxxxxxxx>
Sent: Tuesday, January 5, 2021 11:11 AM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 1956 wiper switch and motor

Challenge of the day:

I am trying to hook up the ’56 wiper switch to the motor.

The service manual labels terminals on the switch: F1 blue, F2 red, A black and “yellow”

My 1956 switch has terminal labeled: F1, F2, A and P

If I hook it up per the manual and I put the remaining yellow wire on P, it does not work.

Is there and alternate wiring diagram with P to match my switch?

thanks

…Jack

Jack Boyle

(913) 544 4650

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/000801d6e385%24bfdc4e10%243f94ea30%24%40gmail.com.

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/BYAPR03MB359162D9306BD2F2E67ACE9082D10%40BYAPR03MB3591.namprd03.prod.outlook.com.