John: lots of information and contacts; Summit and Rockauto do not have them
Matt: thanks for the names addresses!
David: all have the same oversize (they are from my old but cracked block and all looked very nice and almost brand- new) and in fact the formerly virgin block (hello Jean-Yves!!) has been honed to fit these perfectly!
I will inform you when and where I’ll be successful!
Kai
Von: finsruskw@xxxxxxxxxxxxxxx <finsruskw@xxxxxxxxxxxxxxx>
Gesendet: Dienstag, 29. Dezember 2020 19:10
An: 'Matt Allyn' <allynentertainment@xxxxxxxxx>; info@xxxxxxxxxxxxxxxxx
Betreff: RE: {Chrysler 300} one single 413 overbore piston needed
Are ALL 8 cyl’s oversize by .030??
Or is just the one?
If only just the one, I’d cosider a sleeve.
I have used standard size pistons if that would help
I don’t have one, but here are places that sell pistons:
https://www.manciniracing.com
I need one standard piston for my restauration (62 sport, 413 cui)
7 are perfect but unfortunately one is defect and can’t be fixed.
Must have a 0,30 overbore !!
A good used one is absolutely ok
Maybe somebody has one left over?
How about the Scandinavian members?
And in case you can’t help directly: where could I get a new one?
I know the Club had this discussion 3 years ago and it all came down to these racing companies (Diamond, Ross, Venolia) to have them custom made.
Maybe any new sources came up meanwhile?
Thank you very much and have a happy new year!
And of course smooth (or heavy) motoring!
Tierärztliche Praxis für Neurologie
| Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
www.avast.com |
--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/005401d6de01%249a2c0cc0%24ce842640%24%40tierneurologie.de.
--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/E7FF99B0-63B4-4AD9-BC1E-105A10BEF7AA%40yahoo.com.
