[Chrysler300] door adjustments

["RICHARD HUSS rhuss214192@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

 I just tried to install “hang” the passenger door on my 300G I did nothing more than remove it and strip and prime it. now I can’t get the bottom of the door in far enough. I have adjusted the bottom hinge all the way in. It still is out a 1/4” + along the bottom. Top is fine. the front finder is lined up with the rocker so I don’t want to bring the finder out. Any hints? 

Also I am still struggling with the hood shutting all the way. I am able to get both sides to close evenly but still up on both sides a 1/4 or so. 

Thanks for any help before I take a hammer to it. Richard

------------------------------------
Posted by: RICHARD HUSS <rhuss214192@xxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/