Re: [Chrysler300] 1962 300 - Speedo Cable Removal

["John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Tap 360 around inlet cable fitting with hammer and blunt drift ; slight heat with propane — not oxy ; I think there is an external oring , you can replace easily or use rtv after . Might be rtv in there now holding it . ?? 

Sent from my iPhone not by choice 

> On 15 Sep 2020, at 12:31 pm, 'Rick Dutkiewicz' rdr_inc@xxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
> 
> Spray     Spray     Spray     + Time to work
> 
> 
> 
> Rick Dutkiewicz Haynes
> 
> 
> 
> From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Cox Scooter465@xxxxxxx [Chrysler300]
> Sent: September 15, 2020 12:15 PM
> To: Matt Allyn
> Cc: Chrysler 300 List
> Subject: Re: [Chrysler300] 1962 300 - Speedo Cable Removal
> 
> 
> 
> 
> 
> It's a steel holder in a aluminum Case.
> 
> Corrosion sets in try tapping
> 
> It with a light hammer it
> 
> May break it loose.
> 
> 
> 
> Bob Haag
> 
> 
> 
> 
> 
> On Sep 15, 2020, at 12:02 PM, Matt Allyn allynentertainment@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
> 
>    
> 
> Here's a weird one I could use advice on....
> 
> Replacing the Speedometer Cable.
> 
> 
> 
> *    It is free from the back of the Speedometer head
> *    The Bolt & Retaining Clip are off of the transmission
> *    It should wiggle & slide out of the transmission now
> *    BUT...
> *    It feels as though it is super glued in there!  But I know it is not
> *    I have tried pliers on the metal cable housing to help jiggle it loose; but it will not budge
> *    I am hesitant to try & slip a flat bladed item between it & trans case; to pry it away...but maybe that it the next step
> 
> Any helpful hints?
> 
> 
> 
> Thanks
> 
> Matt Allyn
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> ------------------------------------
> Posted by: "Rick Dutkiewicz" <rdr_inc@xxxxxxxxxx>
> ------------------------------------
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
> go to https://groups.yahoo.com/neo/groups/all/manage/edit
> 
> For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
> 
> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
> ------------------------------------
> 
> Yahoo Groups Links
> 
> 
> 


------------------------------------
Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/