RE: [Chrysler300] Oil pressure hose

["'Rich Barber' c300@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Sometimes a compression-type fitting can have the nut partially or fully released ant then the tubing needs to be just forcibly pulled back—due to a ferrule or O-ring sticking..  Wiggle=woggle the tubing and give it a modest pull. 

 

Engineering 101:  Don’t force it, just get a bigger hammer.

 

Rich B.

 

From: Chrysler300@xxxxxxxxxxxxxxxx On Behalf Of Ronald Kurtz mark6268@xxxxxxxxxxxxx [Chrysler300]
Sent: Thursday, August 1, 2019 5:03 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Oil pressure hose

 

 

Hello, everyone:

Any hints on removing the oil pressure hose from the oil gauge? The hex end turns but the hose is not coming off. The dash is out of the car so access is very easy.

Best,
Ron Kurtz
E #292

__._,_.___

---

Posted by: "Rich Barber" <c300@xxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___