RE: [Chrysler300] 300J and Ram K Valve Covers

["Carl cbilter@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Not tack welded.  Held on lower v.c. studs by the nuts.  J/Ram K uses three instead of four.  Passenger side front is not used as the #2 and #4 wires are secured in a bracket that is mounted on the first exhaust manifold stud.. 

Carl Bilter
J consultant

From: Keith Langendorfer keith_A_Lang@xxxxxxxxx [Chrysler300]
Sent: Tuesday, June 18, 2019 9:14 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 300J and Ram K Valve Covers

  
Hi Folks

Do the J and Ram K valve covers have the same ignition wire guide plates tacked welded to the valve covers as the 1964 413/360 engines? I’m converting a 413/360 four speed K to a short crossram and would like to know

Thanks!

Keith
Maine




[Non-text portions of this message have been removed]



------------------------------------
Posted by: Carl <cbilter@xxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/