RE: [Chrysler300] '63 Chrysler 300 Conv. - 413 donut gaskets between exh
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] '63 Chrysler 300 Conv. - 413 donut gaskets between exhaust manifold and pipes.



Hi Mark, the original part number was Mopar 1855029 and they were all metal gaskets.   Current inexpensive replacement part is Fel Pro 9547 or equivalent, but probably not metal.   Mancini Racing or one those outfits probably has metal ones which will last longer; just make sure it has a 2.25” center hole and 3.5” bolt hole spacing to fit the exhaust.  Might be other Mopar part numbers that fit as well; same size gasket was used on many big block Mopars.  

Carl

From: 'Mark Lindahl' mplindahl@xxxxxxxxxxxxx [Chrysler300]
Sent: Tuesday, May 28, 2019 10:29 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] '63 Chrysler 300 Conv. - 413 donut gaskets between exhaust manifold and pipes.

  
Hello All,
 
I have a ’63 300 Conv, formerly with a 383, now 413 with dual exhausts.  The exhaust system has been the same for 29 years since I purchased the 300, with both 383 and 413 engines.
 
In the past, I have had a local muffler shop install what they called “donuts” between the exhaust manifold and the exhaust pipes.  This helped with reducing noise, but also kept the pipes from shaking and hitting the torsion bars, etc.
Now, I am looking for a part number or source to get these “donuts”. Over time, they needed to be replaced since I believe they get crushed.  I do not see them listed in the shop manual.  Any information would be helpful.  Thank you.
 
Regards,
Mark Lindahl
’63 300 Conv.
 
PS – I assume this would be the same exhaust set up for 300K 413 non-RAM engine.




[Non-text portions of this message have been removed]



------------------------------------
Posted by: Carl <cbilter@xxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.