Re: [Chrysler300] Addidtives question -
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Addidtives question -





I’ve used Brad Penn oil, which has zinc added at its inception, for all of my 1959 to 1962 cars,  and have had no issues.  If you’re into oil, https://www.bobistheoilguy.com/forums/ubbthreads.php?ubb=cfrm  is a great venue. 


https://www.walmart.com/ip/Brad-Penn-Oil-009-7119-12PK-20W-50-Partial-Synthetic-Racing-Oil-12-pack/130196829?wmlspartner=wlpa&selectedSellerId=4886&adid=22222222228058636123&wmlspartner=wmtlabs&wl0=&wl1=g&wl2=m&wl3=162991695073&wl4=pla-270740509403&wl5=9060331&wl6=&wl7=&wl8=&wl9=pla&wl10=114220866&wl11=online&wl12=130196829&wl13=&veh=sem&gclid=EAIaIQobChMIl5iQ7PeA3gIVSj0MCh3tUAr_EAQYAiABEgInu_D_BwE 




Sent from Yahoo Mail for iPhone

On Thursday, October 11, 2018, 5:35 PM, 'Michael Ashmore' michael.ashmore@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 



Noel,
 
Interesting information.  My mechanic just told me to run 15-40 Dello or Rotello diesel motor oil in my 300G.  Also he said todays motor oil doesn't have zinc to lubricate the cam and lifters because todays engines are all roller type rockers.  Also he said to add a zinc additive (ZDDP) at every oil change otherwise your cam will be worn down in no time.
 
Lessons learned!
 
Mike 300G.
 
 
 
 
----- Original Message -----
Sent: Thursday, October 11, 2018 9:55 AM
Subject: [Chrysler300] Addidtives question -

 

Several years ago, while at a mini Club gathering at George Riehl's, George had a fellow there who was hawking some products. George highly recommended these. They've been sitting collecting dust, and I'm apprehensive about using them  They're made by Hapco Products out of Fraser, Michigan.-


  • Slip Coat dripless seal additive. Says it "Increases gas mileage 10% to 20%, Clings to lifters and cam, Prevents dry start-ups, Increases oil pressure and engine life, extreme pressure and anti-wear formula."
  • SealLube seal expander - Says it "Positively stops rubber seal leaks in any fluid system, Power steering seals, Rack & pinion seals, Transmission seals, Crankshaft main seals, Any fluid system."

I'm going to toss these unless I hear otherwise, that these are really great to use in my 300.


Thanks,

Noel



__._,_.___

Posted by: milwaukee241@xxxxxxxxx


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.