Re: [Chrysler300] Corbin clamps again

["Keith Boonstra kboonstra@xxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Dave,

Wherever you end up sourcing them, make sure the right number is stamped on the Corbin clamp. Take a caliper and measure the outside diameter of the rubber hose itself. See how many sixteenths of an inch it measures, and that is exactly the number you want stamped on the clamp. E.g. - if the hose OD measures 1/2", you want the Corbin clamp #8. Any other number either won't fit or will be a leaker.

I believe Jeff Carter has some.

Keith Boonstra

-

On Sat, Aug 18, 2018 at 10:34 AM, Dave Dumais dave.dumais@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Does anyone have a source for the flat spring clamps, Corbins, that are correct for 300fuel lines?

No: Napa, or other auto suppliers. Home depot

even-bay I'd hit or miss.

There are 10 clamps on the standard fuel line.

 Screw clamps are not original.

A 1/2 fuel line needs larger than 1/2 clamp

Any leads would be appreciated

Thanks,

Dave

Sent from Yahoo Mail on Android

__._,_.___

---

Posted by: Keith Boonstra <kboonstra@xxxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___