Re: [Chrysler300] Later model (300K) ignition switch tumbler.

["Ray Jones 1970hurst@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hi Keith;
You may be working on the wrong end of the problem.

Might be just that the starter is not disengaging.

Could be the Solenoid is sticking and holding the drive gear and contact internally.

Unplug the signal wire (the wire from the Ing. switch) from the solenoid, and use a jump wire from the Battery to engage the starter. Remove the jumper and see if the starter stops. 

If it doesn't, the solenoid is the problem.

Let us know how it works out..

Ray

On Fri, Mar 9, 2018 at 8:26 PM, 'keith_a_lang@xxxxxxxxx' keith_A_Lang@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Hey folks

My K doesn't disengage the starter via the ignition key so I'm trying to remove the ignition key assembly on my K. I thought this would be easy but is not because I'm missing somerhing. I thought I could just depress a little nub and the key assembly would come out. 

Unfortunately, it isn't coming out so any advice would be most appreciated.

Thanks, 

Keith

Sent from my LG Phoenix 3, an AT&T 4G LTE smartphone

--

Ray Jones. Y'all come on down an see us. Ya hear?

__._,_.___

---

Posted by: Ray Jones <1970hurst@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___