Re: [Chrysler300] Distributor Cap Caution

["Michael Moore mmoore8425@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

John,
I have been building up a supply of OEM Mopar ignition components from E Bay. I can buy J-12Y plugs cheaper than I can buy any plugs at the parts house. Mopar dissy caps, and points are also relatively inexpensive although I don’t mess with old capacitors.
Mike Moore
300H 
> On Jun 10, 2017, at 8:43 AM, John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
> 
> 
> Big problems with junk parts from Asia. Aluminum oxide is an insulator. Great heads up . Watch too for condensers with an imprinted X in blank end of case , they are junk . Same reason . Imprinted x is the ground connection  to internal foils. Aluminum on both sides. It goes intermittent . Intermittant weak  spark 
> 
> Sent from my iPhone
> 
> On Jun 9, 2017, at 9:46 PM, 2HsandaHeritage@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
> 
>> Just removed and junked a one year old distributor cap that was the correct tan color but had aluminum rotor contacts and plug wire sockets.
>> The rotor contacts were corroded and so were 2 of the plug wire sockets - dissimilar metals I guess.
>> The 413 in my 62 Sport ran fine with no load, but kept missing severely at freeway speeds. New black NAPA distributor works fine.
>> Will check my H tomorrow!
>> 
>> 
> 
> 



------------------------------------
Posted by: Michael Moore <mmoore8425@xxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/