Re: [Chrysler300] 1961 300 G A/C Fuse

["Keith Boonstra kboonstra@xxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Val,

Another thing to test is exactly when the fuse blows. If you turn your stat of OFF and it still blows, your problem is somewhere in  the dash controls or power supply dead-shorting. But if it only happens when you demand the compressor, you can suspect the stat arcing or else a short in the single wire leading from the dash to the compressor.

Keith

-

On Sat, Aug 13, 2016 at 1:27 PM, Val Jeffers edward1108@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

  Hi All,

             Just had a new receiver/drier installed yesterday. The mechanic advised the air was nice and cold. Now the 25 amp fuse keeps blowing every time I snap in a new one ! Any thoughts as to the reason ?

                                                                                            Thanks,

                                                                                            Val Jeffers

                                                                                            

                                                                 

__._,_.___

---

Posted by: Keith Boonstra <kboonstra.zeegroup@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___