Re: [Chrysler300] F anti stall device advice

["lindsey@xxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Yes, saw that in the service manual, thks. I backed it off, so not doing anything still have idle issues, so going to look at carb return Springs. Maybe on the weak side for new carbs. The plunger? Moves about 3/16" when not in gear as I adjust the rpms. Sound about right!

Sent from my BlackBerry 10 smartphone on the Rogers network.
  Original Message  
From: David Schwandt
Sent: Tuesday, April 19, 2016 5:54 PM
To: lindsey@xxxxxxxxxxxxxxx; Chrysler300@xxxxxxxxxxxxxxx
Subject: RE: [Chrysler300] F anti stall device advice

When you adjust it, be sure and hold the shaft the adjustment bolt screws
into, else you will tear the diaphragm 
That's usually what has happened to these units.
It does retract when the car is running, correct? If so it is functioning
properly and is supposed to extend when vacuum is low to "goose" the idle
back up
The anti stall pot is not for adjusting idle speed you know

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of lindsey@xxxxxxxxxxxxxxx [Chrysler300]
Sent: Tuesday, April 19, 2016 2:29 PM
To: David Schwandt; Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] F anti stall device advice

Didn't take it apart, just removed from car and cleaned and repainted
outside. The plunger? Moves but sometimes stops idle at 1500rpm, other times
goes back near 750. After going thru F service bulletin again, just going to
back off the adjustment some more and try that first

Sent from my BlackBerry 10 smartphone on the Rogers network.
  Original Message
From: David Schwandt
Sent: Tuesday, April 19, 2016 2:25 PM
To: 'Lindsey'; Chrysler300@xxxxxxxxxxxxxxx
Subject: RE: [Chrysler300] F anti stall device advice

How in the world did you get it apart without wrecking it?
And what did you do about getting it back together again??

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Lindsey lindsey@xxxxxxxxxxxxxxx [Chrysler300]
Sent: Tuesday, April 19, 2016 1:45 PM
To: Chrysler300@xxxxxxxxxxxxxxx Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] F anti stall device advice

After restoration, mine appears to be sticking, maybe too much paint. Idles
to high half the time. Thinking of removing and thorough clean. Any things i
should be concerned about, or not do when cleaning, disassembly? Thks in
advance.

Sent from my iPad

------------------------------------
Posted by: Lindsey <lindsey@xxxxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to
https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links






------------------------------------
Posted by: lindsey@xxxxxxxxxxxxxxx
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to
https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links






------------------------------------
Posted by: lindsey@xxxxxxxxxxxxxxx
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/