RE: [Chrysler300] C300 Vapor lock

["'Rich Barber' c300@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Jack:

 

Our C-300 only had problems starting before putting in the electric pump back by the tank.  Never a problem with vapor lock while running, even though it got hot idling in parades and traffic.  It seemed to run fine on corn gas if it could be started.  

 

Later, and after much engine-system element replacing and checking, a major impediment to operation was found to be a worn and frayed (small) wire between coil and distributor.  It never died, just lost power at higher RPM.  Recently, someone reported a faulty coil that crapped out at high temperature.  Condensers can also go bad, even though they seldom do.  The little wire between the point sets inside the distributor can be difficult to properly tighten and provide intermittent aggravation including FORD.

 

Best wishes for a safe and reliable journey.

 

Rich Barber

1801 Redwine Terrace

Brentwood, CA 94513-6000

Home: (925) 513-6583

Cell:  (925) 783-4893

e-mail:  c300@xxxxxxx

 

 

 

 

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Jack Boyle jackcboyle@xxxxxxxxx [Chrysler300]
Sent: Tuesday, October 20, 2015 8:24 PM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] C300 Vapor lock

 

  

Well after a few false emails let's try this Again

 

We left KC on Thursday for Route 66 mile #1 in Chicago. Until yesterday we had zero problems with anything. Now on Tuesday we were left no option but corn gas. We are on our second tank and numerous vapor locks and it was only 75 degrees here today but we had been on the road 6 hours when it got very bad. Finally quit dead a block from the St. Louis arch. The next realgas is in Rolla MO. Heading out in the am fingers crossed. I guess an electric pusher pump when we get home to KC hopefully Friday.  ...jack


 <https://groups.yahoo.com/neo/groups/Chrysler300/conversations/messages/43002;_ylc=X3oDMTJxNDRjbTV2BF9TAzk3MzU5NzE0BGdycElkAzM3MzI3NDQEZ3Jwc3BJZAMxNzA2NzEzODUyBG1zZ0lkAzQzMDAyBHNlYwNmdHIEc2xrA3JwbHkEc3RpbWUDMTQ0NTIzNDY2MA--?act=reply&messageNum=43002> Reply via web post          

•

	•

	•

	•

  <http://y.analytics.yahoo.com/fpc.pl?ywarid=515FB27823A7407E&a=10001310322279&js=no&resp=img> 





[Non-text portions of this message have been removed]



------------------------------------
Posted by: "Rich Barber" <c300@xxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/