[Chrysler300] 300F Idle Speed Adjustment

["Terry Mctaggart terrymct999@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

According to the 300F Service Bulletin, the curb idle is adjusted by the idle by-pass air bleed screw (the big brass screw on  the inboard side of the carb).  What is the actual procedure for doing this?  Bottom out both screws and then turn them both out by some number of turns?  Something else?  Terry McTaggart

__._,_.___

---

Posted by: Terry Mctaggart <terrymct999@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___