[Chrysler300] 1962 Chrysler sill molding
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] 1962 Chrysler sill molding






This morning I removed the "rattly" and loose sill molding from the drivers side of my 300H..
I had previously purchase a set of 10  clips for both sides.
On my loose drivers side, there are only 4 molding clips installed. It looks like the missing one is up front very close to the front screw. 


(1.) Does a clip go that close? There are no holes there as that area had extensive rust repair many years ago and it wasn't drilled I guess.


(2.) What is the proper way to install the stainless molding once the clips are in place?  
(a.) Slide the molding in front the front and risk paint damage
 (b.) Somehow lift up and snap in?

Thanks, Mike Moore
300H


__._,_.___


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.