[Chrysler300] Anti stall unit

["Rick Vitek" <rpvitek@xxxxxxxxxxxxx>]

I went to work on the anti stall unit on my  300 G. It was not hooked up to a vacuum so I hooked it up to another carb and the vacuum seemed to pull the shaft nicely. When I went to adjust it the male threaded bolt snapped off where it entered the female threaded shaft. I drilled a hole in the male threaded shaft but the ez-out extractor also broke.

 

Anyone know where I could procure another or get this one fixed? Don’t need NOS, just something with same functionality.

 

Thanks.

 

__._,_.___

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___