Keith: Have you discussed the possibility of varying WSW widths? Our ram-engined ’64 300K came with 1” wide WSW’s on its 8.50X14 tires. I know Diamond Back can make any width of WSW but it might be helpful if they are prepared to meet the demand for varying WSW widths. Currently available tires in that size range in OD from 28.1” to 29.1” so the JR78X14’s would probably be the better fit if they are not so fat as to rub on suspension or frame. Any specs on WSW, tread and section width would be appreciated as we patiently (?) wait for these tires. C300K’ly, Rich Barber Brentwoode, CA From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of kboonstra@xxxxxxxxxxxx I just got the following message regarding tires from our friend, Bill Chapman, of Diamond Back. Looks like we have about a year to burn up our old 14" tires before we get to use baldness as an excuse to buy a new set. "Hopefully the first 14" size should be available around June. It will be the HR78 14 with a diameter of 27.5". The larger size JR78 14 mold .....28.5" tall will come later in the year" Keith Boonstra __._,_.___ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |