RE: [Chrysler300] mirror-matic

["Rich Barber" <c300@xxxxxxx>]

You may want to put a low-ampere fuse in the Mirror Matic wire.

 

Someone should buy and share this:  http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem <http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=121251316130&item=121251316130&lgeo=1&vectorid=229466> &item=121251316130&item=121251316130&lgeo=1&vectorid=229466 or:  http://tinyurl.com/klnu45d

 

The wiring schema for a Mirror-Matic is visible in the first picture and includes the online fuse I independently suggested above!  The circuit breaker in the “H” circuit will not protect the Mirror-Matic and its fine power lead.

 

 

C300K’ly,

Rich Barber

Brentwood, CA

 

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Greg Leggatt
Sent: Friday, January 10, 2014 9:01 PM
To: Bob Jasinski
Cc: <Jslayton@xxxxxxxxxx>; <chrysler300@xxxxxxxxxxxxxxx>
Subject: Re: [Chrysler300] mirror-matic

 

  

Johnnie, further to my last post the "H" terminal is the light green 16ga wire. It is a single terminal. The factory would have provided a jumper to connect to it. Simply splice to the light green wire, or, if you want, I"ll make up a jumper for you. 

Greg

Sent from my iPad


On Jan 10, 2014, at 11:21 PM, Greg Leggatt <ggleggatt@xxxxxxxxx> wrote:

Hi guys,

I think you will find the "aux" is hot all the time. I'd hook to "H", which is headlights only.

Greg



Sent from my iPad


On Jan 10, 2014, at 11:03 PM, "Bob Jasinski" <rpjasin@xxxxxxxxxxx> wrote:

  

Johnnie,

 

Per the accessory section in the '60 service manual, the Mirror-Matic is powered from the headlight switch, as it is only meant to be energized when the headlights are on.  I believe you will find an aux terminal on the switch, or double up on one of the switched outputs..

 

Bob J  

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Jslayton@xxxxxxxxxx
Sent: Friday, January 10, 2014 5:24 PM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] mirror-matic

 

  

I have a new mirror-matic to install on the G coupe I am working on-----it has a lead wire coming out of it----can someone tell me where it goes ?---is there anything else I am missing ?-----I can't find much info on it in the service manual-----THANKS--------Johnnie Slayton





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    http://info.yahoo.com/legal/us/yahoo/utos/terms/