[Chrysler300] Re: Overdrive

[Jamie Hyde <jamie.hyde@xxxxxxxxxxxxx>]

Tony Rinaldi installed a 518RH in his car and has a wealth of information on how to do it, so I would contact him. I purchased the adapter to install one in my Imperial but have not had the time to get that project done. From what I was told it is almost a bolt in and the transmissioncenter.net sells all the parts to do the conversion, you must shorten your driveshaft, I just sourced a spare to do that so I can change back if I want to. Tony has a slick wiring system in his F to control the OD and lockup. And as demonstrated it works with his 500+ cube monster as he drove his 300F to the fall meet and back to PA.

Jamie Hyde



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/