Re: [Chrysler300] Corbin (wire) Clamp Pliers

[Ray Jones <1970hurst@xxxxxxxxx>]

*The pliers I've used for the last 40 years or so have a grove along the
jaw from front to middle and one across the jaw from side to side.
*
*This allows you to grasp the wires and open them up from straight on or
from a sideways grip, along the
hose.

*
*Ray*


On Mon, Jul 29, 2013 at 2:06 PM, Knutsen, Mark <
Mark.Knutsen@xxxxxxxxxxxxxxxxx> wrote:

> **
>
>
> Any recommendations on a good set of pliers to use on our wire style
> clamps? I have used channel locks with varying degrees of success. I also
> have purchased a few tools that were supposed to work for Corbin clamps
> with pretty dismal results.
>
> Thanks
>
> Mark Knutsen
> 300 G
>
> [Non-text portions of this message have been removed]
>
>  
>



-- 
*Ray Jones. Y'all come on down an see us. Ya hear?*


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/