Re: [Chrysler300] ram plug wire holders

[lettercars@xxxxxxx]

Hi Marshall:
I may not have understood what you meant by "straight" brackets which  
attach to the ram manifold bolts.  They actually have two bends---one at an  
angle across the bracket beginning near the bolt hole and going toward the side 
 that has the "L" shaped extension for the 2nd wire slot. The second bend 
is  straight across just below the two wire slots.  Yes, they are natural in  
finish, but do have the "wire end" dipped in a black rubber like material.
The picture that you refer to did not, of coarse, get transmitted on the  
list server.
300ly, Gil Cunningham
 
 
In a message dated 7/22/2013 2:07:46 P.M. Eastern Daylight Time,  
granitledge@xxxxxxxxx writes:

Yes.  I have reproduced looms (4) that are under and attached  to the Ram
bolts.  They are straight and unpainted as are the  originals.  The others
are easily found in salvage yards.

I  believe Gary Goers has complete sets but his under the Rams looms
are  formed incorrectly.

As you can see by the picture I have them straight,  which is correct, and
formed.  $50 for set of four  shipped.





**

>   Is any one  re-producing these in a set?
>
> Thanks!
>
> Dave  Schwandt
>
>  <finsruskw@xxxxxxxxxxxxxxx?subject=Re%3A%20ram%20plug%20wire%20holders>
>  <Chrysler300@xxxxxxxxxxxxxxx?subject=Re%3A%20ram%20plug%20wire%20holders>
>
>
>



--  
*Marshall Larson*


[Non-text portions of this message have been  removed]



------------------------------------

To send a  message to this group, send an email  to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send  an email to bob@xxxxxxxxxxxxx or
go to  http://autos.groups.yahoo.com/group/Chrysler300/join and select the 
"Leave  Group" button

For list server instructions, go to  
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to  
http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups  Links






[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/