[Chrysler300] 1958 chrysler 300D ball Joints

[Larry Jabin <larry@xxxxxxxxxx>]

I bought a set of NOS replacement ball Joints

One of the lower ones  is a lot tighter ( a lot harder to turn & swivel) Than the other 3

Do you think it  will loosen up on the car or should i not us it?


Also I have noticed a big difference in the aftermarket ball joints

The ones Bernbaum sells are a lot different than the original style The Stud & Ball are one piece so when the wheel turns the whole ball turns

The originals have the Stud spin in the ball  (2 pieces) when the wheel turns just the shaft spins in the ball

Are the one piece any good and will they wear out sooner since the whole Ball turns every time you turn the wheel?

Thank You

Larry Jabin


Larry@xxxxxxxxxx<mailto:Larry@xxxxxxxxxx>



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/