RE: [Chrysler300] Ignition Cables - Pertronix - What about plug wires?

[awrdoc@xxxxxxxxx]

Henry is on the right track. <br/><br/>A quality 8mm black wire set for a 440 will give you all the wire you need. You will reuse the ends from your Atlas set. <br/><br/>Laquer thinner or other good solvent will remove the white or orange printing. <br/><br/>Using modern wire that is capable of handling CDI ignition will handle the original points/coil ignition. <br/><br/>For the distributor, reuse the straight black ends and red ends for center & #1. <br/><br/>Reuse the red right angle spark plug ends and the 135 degree end near oil dip stick. <br/><br/>Bendable red ends are available for that purpose if you do not have the 135 end. <br/><br/>Tony<br/>300-F Conv't<br/><br/><br/>Sent from Yahoo! Mail for iPhone

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/