[Chrysler300] 300F Torque Converter Housing

["Mark Schueller" <f41324@xxxxxxxxxxxxx>]

Hi All:

I cleaned up my torque converter housing preparing to reinstall it and noticed that there are 2-hair line cracks on the inside.  One runs from the front to back of the housing and the other is in the middle about 3" long.  Neither crack goes through to the outside and cracks are not visible at the ends.  Your thoughts please.  Next, is the torque converter housing painted or did it get a good dose of black over spray when the engine was painted?

Thanks for your feedback.

Mark Schueller
300C,F   

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/