[Chrysler300] Front end rebuild kit From ESPO Spring & Things for 1958 300D

[Larry Jabin <larry@xxxxxxxxxx>]

I bought a front end rebuild kit from ESPO Springs & Things for my 1958 300D

The hole in the upper control arm bushings will not accept the factory bolt because the hole is smaller
Also the bushing has an inner & outer metal sleeve

Has anybody had experience with this

Also The upper control arm ball joint is a ¼ inch shorter than the original  (the part that screws into the control arm)
Will this be a problem?

Any help would be much appreciated

Thanks



Larry Jabin

Larry@xxxxxxxxxx<mailto:Larry@xxxxxxxxxx>



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/