[Chrysler300] Convertible top motor/pump

[RWestra@xxxxxxx]

I replaced a leaky hydraulic pump and motor in my H and I am having trouble 
getting the air out (I think).
 
It seems to lower fairly well but will not raise, or will raise with a 
great deal of effort.  I can help it and after it gets about 1/3 of the way up 
it will continue.  
 
I believe there was air in the lines from the old pump and it may still be 
in there.  I have cycled the top up and down (manually helping it get 
started on the up cycle) 3 or 4 times and it still does not want to operate any 
better.  There doesn't seem to be any binding in the mechanism so I am blaming 
it on air in the system.
 
Any help would be appreciated.  
 
                                                                            
        Rolland Westra
                                                                            
        Rockford, IL   

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/