[Chrysler300] photo journalism

[JettLarry@xxxxxxx]

The schematic shows what should be there but is not. The wiring photos you wanted will be along soon.  Now as to the leaking tranny.  There is not sufficient space to pull out the old packing gasket while laying on your back on the floor.  Everything else has been removed to get at the little bugger inside a vertical hole with but 1.5 inches of space above it.  You can only add less than 6 quarts of ATF before the level of oil raises to leak level.  That means it is 2+ quarts low if the leak not fixed.  I could use a hole saw and cut through the mostly fiberglass floor boards to get at the problem.
What say you?  

jettlarry@xxxxxxx   Larry Jett 510-794 7911 Newark CA



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/