Re: [Chrysler300] Brake booster

[Bill Huff <czbill@xxxxxxxxxx>]

Assuming you have good vacuum, I would be 
checking the booster.  If the booster is bad it 
might signal by a noise of air entering when the 
pedal is pressed.  Could also be a MC/pedal shaft 
adjustment, that relationship might change from 
engine off to engine on.  Not sure about that one.

Bill Huff


At 5/7/201212:10 AM, Paul Martin wrote:
>
>
>I am just finishing up the AAJ disc brake 
>conversion on my 300F. I have evacuated the air 
>from the lines and have a good solid pedel with 
>the car not running, however when I start it up 
>and apply the brakes the pedel goes low to the 
>floor,not all the way and the car still stops 
>but not well. I double checked to make sure all the air was out of the lines.
>
>Ant tips? Is there something I need to do to the booster.
>
>Any help would be appreciated.
>
>Paul Martin
>
>[Non-text portions of this message have been removed]
>
>


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/