RE: [Chrysler300] Xrams on a 361 motor?

["jean-yves chouinard" <jymopar@xxxxxxxxxxxxxxx>]

I have done it about 12 years ago, installed a set in a 60 Polara. The rams
themselves will fit, they are the same unit across the Chrysler line of
cars. When I did my ?conversion?, I did not have exhaust manifolds so ran
the engine without chokes, had to let the engine warm up in colder
temperatures... The 361 is a B block and the 413 is a RB block, so the 413
is a little taller. So if you have the correct ram car exhaust manifolds,
the ?return? heat pipes that go from the rams to the exhaust pipe may need
to be slightly shorter? But the short elbows that go from the rams to the
exhaust manifolds should fit o.k. as the manifold is bolted to the heads,
therefore no distance changes there between a 413 and a 361.

Good luck and have fun!

Jean-Yves Chouinard  

 

De : Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] De la
part de Jay R
Envoyé : 24 avril 2012 00:45
À : chrysler300@xxxxxxxxxxxxxxx
Objet : [Chrysler300] Xrams on a 361 motor?

 

  



Hello all from snowy central PA, six inches of snow last 24 hours. I have a
tech question, can I put a set of 61G cross rams I have on a 361 cubic inch
1960 Dodge motor I have? Thanks in advance from wintery PA. Jay 

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/