[Chrysler300] 1960 Brakes

["gary_r_23" <moparfan@xxxxxxxxxx>]

Hello All,
I have a question about how to orient the front brake support plate. Here's the part I'm talking about: http://tinyurl.com/6ojxat2.

There seems to be only 2 ways this will fit onto the dust shield:
a. oriented as shown
b. spun 180 degrees so top is bottom and bottom is top.

Can one of you confirm it makes no difference which of those 2 orientations is used?

I was amused to find my upper wheel cylinders were swapped left to right. This put the bleeder hole below the flexible brake hose. Now I understand why I had so much trouble getting all the air out of system ever since I've owned it! Gotta love those previous owners.

Gary Runkel
Canton, MI



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/