[Chrysler300] 300B Gas Tank Sending unit question: I need the float only

["Jim Ashenmacher" <ashie1@xxxxxxxxxxx>]

Hello to all:

    Pulled my gas tank to clean it.    Sending unit was erratic.     I cleaned the sending unit and it measures good but the actual cork float

is weighted and in bad shape from old gas.    I haven't been able to locate a float (cork or otherwise) that would work.     Does anyone

have any recommendations or p/n for a float that might work?   

Thank You Kindly
Jim Ashenmacher
Rochester, MN
1956 300B

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/