[Chrysler300] 300C Front Universal Joint Dust Cover Measurement

["Mark Schueller" <f41324@xxxxxxxxxxxxx>]

Hi Gang:

This is a long shot but I'm going to try.  Does anyone have a 300C on a drive up lift (wheels bearing weight of the car) that could take a measurement for me?  If you do, please measure the length of the front universal joint rubber dust cover from the outer edge of front metal clamp to outer edge of rear metal clamp.

The rear end on my car was swapped out with a Dodge rear end ($*&#@!) before I bought it and the standard replacement rubber dust cover appears too short.  After a lengthy search, a longer dust cover is not available .  Knowing this dimension will help me decide to go with  1)  the standard dust cover stretched to the limit or  2)  lengthen the drive shaft or  3)  look for a replacement rear end.  The car isn't a "numbers car" but it is a very nice driver.

Thank you so much,

Mark Schueller
300C,F
             

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/