[Chrysler300] C Door panel Screws

["Rob Kern" <robkern@xxxxxxxxxxxxx>]

Hello 300’ly to all!
    Along the lines of conversation regarding the door panel scews for the D and recently stated for the E, the C has them also.  I was advised by our former MYC that the new replacement door panels I installed were not accurate in that the upper door panel screws were not present.  Sure enough there were holes drilled in the inner door frame for the screws to be applied.  I carefully drilled the holes and place the stainless screws with the circumferentially raised edge washers (like a  micro dog dish with a center hole for the screw) for accuracy AND a better fitment of the door panel from the end on view front and rear.  Rob Kern

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/