[Chrysler300] 300H ball joint socket

[Joe Williams <jfwilliams2007@xxxxxxxxx>]

Hi All,
    I've just started a restoration on a 300H so this is the first of many dumb questions.  I'm looking for a socket to remove the screw in ball joints.  The shop manual calls for a C-3560 tool.  Alot of tool website have a tool called OTC 8033 that they claim is similar to the Miller C-3560.  My question is will these work?  I can pick one of these up for alot less than the Miller C-3560 socket.  
Thanks for you help.
Joe Williams
Silver Spring, MD

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/