[Chrysler300] Re: Chrysler special tools

[Jamie Hyde <jamie.hyde@xxxxxxxxxxxxx>]

The tilt column in my 65 was made by GM . I bought a new switch at fall Carlisle from Hubbard's GM and here is a link to a chebie site where you can download the entire service manual for the Comfort Tilt column.  I used a block of wood cut down and inserted into the "shell" to remove it, using  a slide hammer and some dry wall screws inserted into the wood. Our lower bearing is slightly different than the GM bearing however, I bought the GM bearing kit hoping to use it and found when I got home it was different.

http://www.chevytalk.org/fusionbb/showtopic.php?tid/243822/


Jamie Hyde



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/