Re: [Chrysler300] Wheels: Bolt pattern for 60 Chrysler

[Ronald Kurtz <mark6268@xxxxxxxxxxxxx>]

Hello, Kenny:

According to the service manual for a 1960 Chrysler New Yorker, the wheel size 
is 14" x 6 1/2" K. Bolt pattern is 4 1/2" and stud size is 1/2" x 20. Tire size 
is 9.00 x 14 (same as the E). All should be the same for the F.

Best,
Ron Kurtz
E #292




________________________________
From: Kenny Cassady <kennycassady@xxxxxxxxxxxxx>
To: Chrysler300@xxxxxxxxxxxxxxx
Sent: Tue, December 13, 2011 3:26:23 PM
Subject: [Chrysler300] Wheels: Bolt pattern for 60 Chrysler

  
Hey gang. Does anyone know off the top of your head the bolt pattern for a
60 Chrysler? In this case I'm looking at a 60 New Yorker coupe, but
assuming it's the same as a 300.

Also, were these usually right hand and left hand threads, or all the same?
Or did they vary?

Thanks much!
Kenny




[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/