Re: [Chrysler300] repop ram wire bracket

[lettercars@xxxxxxx]

All:
It is great that these wire brackets are now available, thanks to  Gary.  
It needs to be noted, however, that not all ram  engines are the same..Very 
late 300Fs and all 300Gs do not use the head bolt  attached two wire bracket 
under the power steering pump for wires #1 and  #3.  Instead, these cars use 
the "standard" B engine bracket attached to  the valve cover bolt and are 
routed over that cover.   Also, some  300Gs had a 2-wire type bracket 
attached to a head bolt near #6  sparkplug.  300F and G brackets are not painted, 
except those attached to  the head bolts or the valve cover.  These are, of 
course, painted black  with the engine. The remainder are not painted as they 
are put on later  when the ram manifolds are installed.
 
It should also be noted that all the brackets should be dipped in a rubbery 
 material on the wire ends.  They do not appear to be so in the  photos.
 
Now, it has been a very long time since I did my ram K, and it is an hour  
away, in storage. If memory serves, its wire bracket arrangement is quite  
different.  I will defer to some member who can look at their original  car.  
I know the big cast iron exhaust headers on the J and ram K make a  
difference, but do not remember the details.  Do know they incorporate the  white 
heat shielding wire sleeves where the wires route close to those  manifolds.  
Can any 300J/ram K owners enlighten us?
 
300ly, Gil Cunningham
Tallahassee, FL
 
In a message dated 8/16/2011 6:58:42 A.M. Eastern Daylight Time,  
bob@xxxxxxxxxxxxx writes:


Here  is a link to the  picture:

http://www.chrysler300club.com/rcmstuff/ggoers/ram.html




On  8/15/2011 11:18 PM, Fern wrote:
>
> Just got the word that Gary  Goers finally has new reproduction ram 
> spark plug brackets available  for 1960 to 1964 chryslers. Fern with 
> 300H  convertible
>
> hi fern ......... here are the new spark plug  brackets from gary goers 
> . get them while they are hot . maybe you  could put this on the 300 
> forum bob  hayen
>



[Non-text portions of this message have been  removed]



------------------------------------

To send a  message to this group, send an email  to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send  an email to bob@xxxxxxxxxxxxx or
go to  http://autos.groups.yahoo.com/group/Chrysler300/join and select the 
"Leave  Group" button

For list server instructions, go to  
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to  
http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups  Links






[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/