[Chrysler300] Sprag Spring Retainer - '63 Aluminum Torqueflight

["Mark Lindahl" <mplindahl@xxxxxxxxxxxxx>]

Hi All,

I learned a few things today when my '63 Aluminum Torqueflight was being inspected prior to rebuild.
One of the components that needed to be replaced was the 'Sprag Spring Retainer'.  
I don't remember having heard of this component on the forum.  
The mechanic had a little trouble getting this part, but finally found one.

Is there a good source that the Chrysler 300 club recommends for this part?  What is the price?
>From what I have seen on my transmission and some info on the internet, this part is a wear item that will need replacing.

300ly,
Mark Lindahl
'63 300 Conv

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/