Re: [Chrysler300] Manifold Heat Control Valve Solvent

[paul <paulholm@xxxxxxxxxxxxx>]

On 5/18/2011 7:31 PM, Bob Jasinski wrote:
> Warren,
>
> I am surprised to read that you use a lubricant on lug nuts.  Most service
> manuals I have read state to torque lugs to spec on dry threads only.  Years
> ago I applied a lubricant to lug nuts and had a very difficult time getting
> them off because they were over torqued due to the lubricant.  I would never
> lubricate lug nuts myself, as it would affect the torque rating.
>
> Bob J

WAY BACK WHEN I first did a lot of research that allowed me to rebuild 
my very first engine (in my 300-C no less) I found several charts that 
had the revised values to use when torqueing fasteners based upon the 
type of lubricant used or not used ! I believe that information is still 
locatable and VERY USABLE still!!!


-- 
Paul Holmgren
Mine: 2 57 300-C's in Indy
Hers: 05 PT GT R/T HO Stage 1
Hoosier Corps L#6


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/